Wood and faux wood blinds are popular for window treatments due to their timeless appeal and durability. Installing these blinds as outside mounts can enhance your windows’ aesthetics and provide better light control.
In this comprehensive guide, we’ll walk you through the process of hanging outside mount wood blinds and faux wood blinds, ensuring a successful installation.
What Are Outside Mount Faux Wood Blinds?
Outside mount faux wood blinds are a type of window covering installed outside the window frame rather than inside. These blinds are designed to protect the entire window, including the window frame itself, and are typically mounted on the wall or above the window. Here are some key characteristics and advantages of outside-mount faux wood blinds;
Mounting Location: As mentioned, these blinds are installed outside the window frame, which means they are typically mounted on the wall or the window trim itself.
Coverage: Outside-mount blinds provide a complete window range, helping block out more light and offer greater privacy than inside-mount blinds.
Aesthetic Appeal: They can give a clean and finished look to a window, as the blinds can extend beyond the frame, creating an illusion of more oversized windows.
Versatility: Outside mount blinds can be used in various window types, including windows with shallow frames or not perfectly square windows.
Easy Installation: Installing them is straightforward because they do not necessitate precise measurements within the window frame.
Process of Installing Wood & Faux Wood Blinds
Here are the steps to follow for Installing Wood and faux Wood Blinds;
Step 1: Gather Your Tools and Materials
Before you begin, make sure you have the following tools and materials ready:
- Wood blinds or faux wood blinds
- Mounting brackets
- Screws
- Screwdriver or drill
- Measuring tape
- Level
- Pencil
- Anchors (if needed)
- Step ladder (if necessary)
Step 2: Measure Your Windows
Precise measurements are essential for a flawless installation. Measure the window width from the outside edges of the window frame where you want to mount the blinds. Be sure to measure at the top, middle, and bottom to account for any irregularities.
Step 3: Mark Your Mounting Locations
Mark the mounting locations on the wall or window frame using a pencil. Typically, it would help if you place the brackets about 2-4 inches beyond the window frame on each side for outside mount blinds.
Step 4: Install the Mounting Brackets
Position the mounting brackets at the marked locations and secure them using screws. If mounting the blinds on drywall, use anchors for added stability. Ensure that the frames are level and aligned with each other.
Step 5: Attach the Valance Clips (If Applicable)
If your blinds come with a valance (a decorative covering for the headrail), attach the valance clips to the headrail according to the manufacturer’s instructions.
Step 6: Hang the Blinds
With the mounting brackets, it’s time to hang your wood blinds or faux wood blinds. Most blinds have a headrail with pre-installed clips. Insert the clips on the headrail into the brackets until you hear a click, indicating that they are securely in place.
Step 7: Test the Blinds
Operate the blinds to ensure they function smoothly. Pull the cord or use the wand to raise and lower the blinds. Tilt the slats to control the amount of light entering the room. Make any necessary adjustments to ensure the blinds are level and aligned.
Step 8: Install the Valance (If Applicable)
If your blinds have a valence, attach it to the valence clips. Make sure it covers the headrail and brackets for a finished look.
Step 9: Final Checks
Double-check the installation to ensure everything is secure and level. Remove any pencil marks from the wall or window frame. If you have multiple blinds to install, repeat the process for each one.
Step 10: Enjoy Your Beautiful Blinds
With your outside mount wood blinds or faux wood blinds successfully installed, step back and admire the transformation of your windows. These blinds provide excellent light control and privacy and enhance your space’s overall aesthetics.
Also read: Why Roller Blinds Are The Best Option for Your Homes
Conclusion
Hanging outside mount wood blinds or faux wood blinds is a manageable DIY project that can elevate the appearance of your windows. By adhering to these detailed step-by-step guidelines, you can attain a polished and professional appearance installation, providing years of beauty and functionality.
Refer to the manufacturer’s instructions for your blinds, as specific guidelines may vary. With the right tools and patience, you’ll enjoy the benefits of your new window treatments in no time.
Can’t DIY but still want to upgrade your space? Contact Top Notch Custom Blinds at (954) 868-8989 to get professional blind installation services today and quickly transform your home!
